♦ TM1800 / TC610
- Feature Part Transfer Printing Machine
TM1800 TC610 is designed for non-stop transfer thermal printing. By including the process of wrapping paper and fabric, is designed to assist the operator. After the fabric temperature after setting the printing cylinder before the operator puts the paper cylinders, when they contact each other around the cylinder by the effect of heat special dyes (sublimation) paper through the fabric. The paper, the voltage is set using the brake system.
Fabric to be printed according to the types of electronic thermostat temperature of 50 ° C to 230 ° C with the set. The pressure between the paper and the fabric is provided with special seals. According to the severity of the pressure in the pneumatic system is set by the type of cloth. Roller in the diathermic (heat pass) the application of the oil pressure using resistance heating is actuated electrically.
Areas of use
- Transfer printing paper, synthetic fiber blended fabric prints
- PVC film and the fabric to each other two of the same genus or two different lamination (bonding) is used.
- Used in laser printing system.
- Any kind of fabric used in dry-aprelemede.
- KRAS machine is used for ironing the fabric.
T 1800/610 TC-transfer printer
Working Width: 1800 mm is
Cylinder Diameter: 610 mm is
Heating System: Closed Loop Oil Isıtmalıdır.Yag Mitigating system is applied.
Working speed: Early 200-450 mt. between production
Mak. Electric power: 29 kW of electrical power (three-phase) 380 V, 50-60 Hz
Continuous Coverage: Approximately 17 kW hours of electricity consumption.
Pressure System: Max. 6 bar air pressure
Drives: A.C Inverter
Potent Blood pressure and speed Adjustable Fabric Winding System
Felt 100% nomextir
Net Weight: 2000 Kg.
The area covered by Width: 1800 mm
Length: 2850 mm
Height: 1600 mm
Two motors are machines.
Wrapping paper insertion Koroyucu Place and Location
C. 80 minutes after turning the power on 230 per cent respectively.
For safety reasons, run back to the master cylinder.
There are safety and Fabric Belt Scraper for scraping.
Has an average system automatically seals.
There Cooling Fan Pad.
The machine width 1800 mm.
To be used in case of power failure the cylinder has a manual crank.
Entrance to the machine for emergency stop and safety wire barrier that prevents compression cylinders are used.
Fabric Cooler Fan
Extra paper ball from the top mount
Wrapping paper 'without rod reel to reel system
Tension Rod Protector paper
Tural Makina Range
TM1800 / TC610